Kyiv Repair and Mechanical Plant, Open Joint-Stock Company

  • Address:
    6 Harmatna str., c. Kyiv, 03067, Ukraine
  • Telephone:
    +38(044) 456-20-21, 456-60-45
  • Web-site:
    http://www.krmz.kiev.ua   
Chairman of the Board: Andriy Kurdyukov

Within 40 years Kyiv Repair and Mechanical Plant (hereinafter referred to as the Company) has been successfully manufacturing and selling its products in Ukraine, Russia and Belarus. Among the main products are lifting devices, gigs, reducing gears, drilling equipment as well as services in repairing.

In 1994 the Company was incorporated into a public joint stock company. As of today Company’s statutory fund makes more than 2.5 mln. Hrn. Individuals and legal persons hold 40 % and 60 % of the Company’s statutory fund respectively.

Under difficult economic conditions the Company has managed to save its both production capacities and engineering and technical personnel.

Company’s design & engineering bureau is permanently developing and introducing new technologies that meet modern economy, technology and ecology standards. In doing so, the Company is successfully co-operating with the leading Ukrainian scientific and research institutions. Company’s products are easily recognised for their reliability, ecological safety and low prices that make them competitive both on the local and foreign markets.

Besides the main products the Company also manufactures consumer goods and various rolled-metal products designed for public utilities and furniture and construction industries.

THE PRODUCTS

A strong trend of construction industry development is currently observed in Ukraine. Most of the construction companies are moving towards new technologies applicable to the construction. In particular, the method of pile installation by drilling and injecting concrete has recently become wide-spread. Many companies and firms have, therefore, imported the adequate and expensive equipment, the expendable accessories of which eventually come to their failure, yet the imported accessories are very expensive.

The Company is one of the few companies in the CIS countries that has already developed and introduced the manufacture of both the spare parts and sets of equipment designed for Ukrainian-made and imported facilities applicable to pile installation. The products are identical in quality to similar imported facilities, yet the prices for the Company’s products are considerably lower. In addition, the Company guarantees all products against damages and failures.

Please find below the list of goods manufactured including the equipment designed for pile installation by drilling:

- Electric drives;
- Bores
- Feedscrews of 400-800 mm in diameter;
- Lunnettes
- Swivels;
- Concrete pipe
- Feedscrews cleaning devices and others

Motor reducing gear SO-2
Designed for drilling body rotation in pile installation
General characteristics:
- electric motor of 55 kW capacity, 1000 turns per minute;
- nominal rotatory moment – 1600 kgm;
- number of output shaft revolutions – 30 rpm
- diameter of drilling – up to 800 mm

Electric reducing gear EP-1
Designed for drilling body rotation in pile installation
General characteristics:
- electric motor of 55 kW capacity, 1000 turns per minute;
- nominal rotatory moment – 2096 kgm;
- number of output shaft revolutions – 30 rpm
- diameter of drilling – up to 800 mm

Electric reducing gear EP-2
Designed for drilling body rotation in pile installation
General characteristics:
- 2 electric motor of 55 kW capacity, 1000 turns per minute each;
- nominal rotatory moment – 2096 kgm;
- number of output shaft revolutions – 30 rpm
- diameter of drilling – up to 800 mm

Hoists possessing general characteristics as follows:
- thrust effort – 2.5 t.s.
- maximum speed of rope reeling – 6.4 m per min
- rope diameter – 17.5 mm.
- rotatory moment at the drum shaft – 570 kg.m.

All products are certified to Ukrainian and Russian State standards.

The Company has been lately developing new markets, thus adding new products to its traditional line. It can offer now a wide range of products designed for public utilities such as:

- Goods designed to improve the adjusted territory (including cafes, parkings etc.) that comprise barriers, special locks, latches, metal gates and fences;

- Facilities designed for gas filling stations that comprise fuel tanks up to 50 m3 capacity, pipeline joints of large diameter (pipe bends and etc), pipeline collars of 25-1600 mm conditional passage diameter and others;

- Facilities designed for schools and kindergarten’s sports-and playgrounds that include swings, carrousels, athletic facilities, training devices etc;

- Armoured doors, window grids, staircases, benches, garbage containers, hatches, kiosks and others;

Products’ painting by pneumatic pulverising is also available.

In addition to the above the Company renders a great variety of services that comprise the following:
- repair of automotive lifting devices of different modifications and manufacture of spare parts;
- mechanical works including details machining, cutting of different types of teeth for gears, cutting of stars for chain-drives etc.

Among our customers are “Osnova SOLSIF” Private JSC, “Fundament” Private JSC that refer to the most well-known construction companies in Ukraine and other specialised organisation located in Kiev, Odessa and Odessa region.


Company photo
Company information
Go to the company description »
CRM Reviews
New companies